This Cottage Industry Wedge Parts page is provided free of charge as a service to individuals within the TR7 & TR8 enthusiast community, to serve as a venue to encourage the development of unique parts, services and solutions for issues with our Wedges. You do not need to be a TWOA member to place an ad, however ads are limited to individuals only. TWOA does not endorse any product listed below and is not responsible for the content or accuracy of any posted listing. Any financial exchange will be between you and the service provider so as always, buyer beware.
If you have a Wedge oriented product or service send an email to the webmaster at secretary@triumphwedgeowners.org with descriptive information, photos and contact information. TWOA will not collect any fees for advertisers.
Ads will be posted for 180 days, and can always be renewed after expiration by contacting the secretary.
IMPORTANT: By placing an advertisement, you attest that you created the image(s) that accompany your ad. TWOA may, at its sole discretion, and without any prior notification, remove any advertisement for any reason.
If you have a Wedge oriented product or service send an email to the webmaster at secretary@triumphwedgeowners.org with descriptive information, photos and contact information. TWOA will not collect any fees for advertisers.
Ads will be posted for 180 days, and can always be renewed after expiration by contacting the secretary.
IMPORTANT: By placing an advertisement, you attest that you created the image(s) that accompany your ad. TWOA may, at its sole discretion, and without any prior notification, remove any advertisement for any reason.
TR7/TR8 Gas Cap cable Posted: 2020-5-04
Have you ever forgot to replace your Wedge's gas cap after a fill-up? Many of us have at one time or another but most of the time we have been lucky enough to catch our mistake before we lost the cap. Unlike today’s newer cars that have a retaining strap or a holder inside the filler flap to hold the cap while we refill, Wedge owners place the cap on the rear deck or the fuel pump and sometimes we forget to replace it. I can't tell you the number of times I have pulled over after a refill because I couldn't remember whether I had reinstalled the cap. With my cable, your worries are over.
Price: $4 + first class postage
For more information and to order, CLICK HERE and you will be transferred to my order page.
Gary Klein
3D Printed Parts Posted 2020-6-18
|
Brian Tilton (British Cars of New Hampshire) has made several 3D printed parts for the TR7 and TR8 as shown in the photo. For further details and brief write-ups about the parts, check back issues of The Bulletin, specifically Issues 47 and 48. You must order these from Brian directly. His prices are as follows:
Note: I always add in $5 for shipping anywhere in the US. Prices: Drain plugs set of 4: $25 per set including shipping in the US. Glove box straps set of 2: $25 per set including shipping in the US. Gear shift gaiter: $14.00 includes shipping in the US. TR8 Exhaust muffler bumper: $25 each (they take a long time to print) Shipping included. TR8 spark plug wire guide: $15 each shipping included. The latest 3D printed part, UKC 3027, LT77 Vent Cap Cover $12 including postage to anywhere in the US. Email me for shipping to other destinations. Email for Brian: bptilt@myfairpoint.net |
|
Triumph Wedge Owners Association (TWOA)
TWOA is an Affiliate Chapter of the Vintage Triumph Register
TWOA is an Affiliate Chapter of the Vintage Triumph Register